SHOWER PROFILE WALL TO FLOOR INCLINED

 The inclined strips for a linear drain are the best solution if you appreciate a professional approach to finishing your bathroom. Thanks to the strip for the shower tray, your shower will acquire a neat and elegant appearance. The slope strip is designed to mask the unsightly edge of the tiles while allowing a slope towards the drain without the need to cut the tiles into a "bag."

The strip forces a 2% drop, so you can be sure that your shower is perfect in every aspect, both technical and visual.

Choose a practical solution:

A product in the spirit of DIY The main advantage of our shower tray strips is their ease of installation and cutting. Any beginner DIY enthusiast can handle them without problems. All you need for installation is tile adhesive and silicone, while cutting can be done with an angle grinder or a saw blade. That's all it takes to easily achieve a beautiful visual effect.

How to choose the correct strip?

Remember that the strips are available in right and left variants and in two standard lengths: 120 cm and 180 cm. Stand in front of the line drain: your left hand is the left strip and your right hand is the right strip. If you have a floor or glass on one side, remember that instead of a wall strip, you should use a perimeter strip, or not use any strip at all.

Important note -

If you use the 180 cm side profile ( LS from 180 cm ) and at the same time you want to use the front profile (LC) on the front part of the shower tray, due to the compatibility of the elements, this profile must be purchased in the 180 cm version ( LC from 180cm , as well as the side profile of 120 cm (LS from 120 cm) should be used with the front profile (LC) the shower tray of 130 cm( LC from 130cm ).