DET 1

Professional stain remover for oil, grease, grime, and ink

Line: Professional maintenance

DESCRIPTION AND FUNCTION

DET 1 is a non-foaming, solvent-based liquid stain remover formulated to remove greasy and oily stains. Even stains that have penetrated deeply are drawn to the surface and absorbed by the solid substances in the product, then removed with simple mechanical action.

⚠️ For food stains such as wine, fruit, coffee, etc., use DET 2.

SUITABLE SURFACES

Suitable for:

• Porous stone materials

• Non-porous stone materials

❌ Do not use on rubber, linoleum, synthetic materials, or painted surfaces.

DIRECTIONS

Suitable for removing:

• oil

• grease

• grime

• wax

• smog

• soot

• marker and felt-tip pen marks

DIRECTIONS FOR USE

Make sure the surface is dry and clean.

• Shake the bottle well before use

• Apply DET 1 with a brush or roller until the stain is completely covered

• Leave to work until completely dry (at least 1 hour; drying time varies depending on environmental conditions)

• Drying can be accelerated with a stream of hot air

• Remove the dry talc with a spatula

• Rub with a cloth, paper, sponge, or brush dampened with water

• Repeat the application if stains persist or are deep-set

• Protect any adjacent painted areas

• Keep the material out of direct sunlight until completely dry

➡️ Temporary rings may appear on porous surfaces and will disappear once the material is dry.

COMPOSITION

• Blend of water-soluble solvents with low environmental impact

• Highly absorbent powders

• Contains no chlorinated compounds or benzene derivatives

• VOC content (Directive 2010/75/EC): 370 g/l

• Product not intended for uses covered by Directive 2004/42/EC

NOTES

• Does not damage marble, granite, or natural stone

• May locally remove existing protective treatments, which will need to be reapplied

PRELIMINARY TEST

• Always test on a small area to check compatibility, appearance, and the number of applications required

STABILITY AND STORAGE

• Store in the original container, tightly closed

• Recommended temperature: 15°C – 25°C

• Use within 6–8 months of the purchase date

SAFETY

⚠️ Flammable solvent-based product.

• Use only in well-ventilated areas

• Wear solvent-resistant, waterproof gloves

• Keep out of reach of children

• Always consult the label and safety data sheet

IMPORTANT

• The solvents in the product may locally remove existing water-repellent or oil- and water-repellent treatments

• Always carry out a preliminary test before application

PACKAGING

• 300 ml bottle

LIMITATIONS AND LIABILITY

The information provided is based on published literature and laboratory tests and does not constitute a formal guarantee. The manufacturer's liability is limited to the purchase price of the product alone. The manufacturer accepts no liability for damage resulting from improper use, applications that do not comply with instructions, or unsupervised work.

See the full technical data sheet ⬇️