Shower wall profile right in polished silver stainless steel

PROFILE SHOWER WALL TO SLOPING FLOOR

The sloping strips for a linear drain are the best solution if you appreciate a professional approach to finishing your bathroom. Thanks to the shower tray strip, your shower will acquire a neat and elegant look. The slope strip is designed to mask the unaesthetic end of the tiles and at the same time allow a slope towards the drain without the need to cut the tiles in a "bust".

The strip forces a 2% drop, so you can be sure that your shower is perfect in every aspect, both technically and visually.

Choose a practical solution:

A product in the DIY spirit. The main advantage of our shower tray strips is their ease of installation and cutting. Any DIY enthusiast can handle them without any problems. All you need for installation is tile adhesive and silicone, while cutting can be done with an angle grinder or a saw blade. This is all you need to easily achieve a beautiful visual effect.

How to choose the correct strip?

Remember that the strips are available in right and left variants and in two standard lengths: 120 cm and 180 cm. Stand in front of the drain line: your left hand is the left strip and your right hand is the right strip. If you have a floor or glass on one side, remember that instead of a wall strip, you should use a perimeter strip, or not use any strip at all.

Important note -

If you use the 180 cm side profile ( 180 cm side profile ) and at the same time you want to use the front profile (LC) on the front of the shower tray, due to the compatibility of the elements, this profile must be purchased in the 180 cm version ( LC 180cm ), as well as the 120 cm side profile (LS 120 cm) should be used with the front profile (LC) of the 130 cm shower tray( LC 130cm ).