• Send Us a Message
  • Skip to content
    Contact us +39 0536 1711382 sales@il-com.com

    Two-component epoxy filler for grout from 1 to 15 mm Black

    New
    €24,90
    SKU: Fuga-Black-1

    Two-component epoxy filler for grout from 1 to 15 mm Black

    New
    €24,90
    SKU: Fuga-Black-1
    Select Size
     More payment options

    Universal epoxy grout, two-component epoxy mortar for filling joints from 1 to 15 mm.
    In accordance with the PN-EN 13888:2010 standard as RG.

    USEFor the escape of wall and floor coverings, mosaics, including glass mosaics and natural stones.
    For underfloor heating. Suitable for areas exposed to acids, bases, oils, solvents, and high-pressure water.
    Recommended for food and chemical industries and places with high hygiene requirements. Waterproof, with high mechanical resistance.

    COMPOSITIONMaterial made of two-component epoxy resin:
    Componente A - epoxy resin with filler | Componente B - hardener

    MODO D'USO: Pour the entire Component B - hardener into Component A and mix thoroughly for at least 3 minutes with a low-speed mixer until a homogeneous paste is obtained.
    Strictly adhere to the indicated proportions. Do not dilute the grout with water or solvents. Carefully apply the mortar in the joints using a special hard rubber spatula for epoxy grouts.
    Remove the excess grout with the same trowel diagonally across the surface of the tiles. Profile immediately after filling with the grout. Start profiling within 15 minutes of application, using a solvent-soaked epoxy grout sponge. Profile the joint with circular movements, removing the excess grout. Then, with a regular sponge also soaked in xylene, remove the greasy emulsion and finish profiling the joint. Rinse at least 2 times. Do not allow any residue to harden on the ceramic surface, as their removal will only be possible mechanically.
    TECHNICAL DATA: (at 20°C and 50% relative humidity)
    - Mixing proportions: by weight (A:B) 9.3: 0.7 - Density of the mortar: 1.35g/cm3
    - Working temperature: +10°C to +25°C - Working time: 25-30min (depends on the temperature of the mortar and the environment - at temperatures above 25°C the mortar hardens more quickly) - Initial setting time: 24h - Full chemical resistance: 7 days
    INDICATIVE CONSUMPTION: depends on the width and depth of the grout and the size and shape of the tiles.
    STORAGE: Store in a dry and shaded place at temperatures between 5°C and 25°C. Do not freeze or overheat the product. If stored under the indicated conditions and in sealed packaging, the shelf life is 18 months from the production date indicated on the packaging.

    0 / 0

    Customer Reviews

    Be the first to write a review
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    undefined
    en
    EN
    Open drop down